Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kynar Flex® 3050-52 - PVDF - ARKEMA

Material Data Center offers the following functions for Kynar Flex® 3050-52:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kynar Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Kynar Flex® 3050-52 resin is a copolymer of vinylidene fluoride and hexafluoropropylene specifically designed for flexible plenum cables needing low temperature impact properties down to -40°C.

Its main characteristics are:
- Very high flexibility
- High melting point
- Excellent low temperature impact resistance at -40°C
기계적 특성단위시험규격
ISO 데이터
인장탄성률 550 MPa ISO 527
항복강도 19 MPa ISO 527
항복변형률 15 % ISO 527
파단시 평균신율 >50 % ISO 527
열적 특성단위시험규격
ISO 데이터
녹는점, 10°C/min 167 °C ISO 11357-1/-3
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
Yellow Card 유효한 - -
특징
생산 공정
기타 압출
인도 유형
펠렛 (입자,알갱이)
특성
Copolymer
지역별 검색
화학적 매체에 대한 저항력
에서의 아세트산 (질량 5%) (23°C)
23 °C에서의 시트르산 용액 (질량 10%) (23°C)
23 °C에서의 락트산 (질량 10%) (23°C)
에서의 염산 (질량 36%) (23°C)
23 °C에서의 질산 (질량 40%) (23°C)
에서의 황산 (질량 38%) (23°C)
에서의 황산 (질량 5%) (23°C)
에서의 크롬산 용액 (질량 40%) (23°C)
염기
에서의 수산화나트륨 용액 (질량 35%) (23°C)
에서의 수산화나트륨 용액 (질량 1%) (23°C)
에서의 수산화암모늄 용액 (질량 10%) (23°C)
알코올
23 °C에서의 이소프로필 알코올 (23°C)
23 °C에서의 메탄올 (23°C)
23 °C에서의 에탄올 (23°C)
탄화수소
에서의 n-헥산 (23°C)
에서의 톨루엔 (23°C)
에서의 이소옥탄 (23°C)
케톤
에서의 아세톤 (23°C)
에테르
에서의 디에틸 에테르 (23°C)
광유
에서의 SAE 10W40 멀티그레이드 모터 오일 (23°C)
에서의 SAE 10W40 멀티그레이드 모터 오일 (130°C)
에서의 SAE 80/90 하이포이드 기어 오일 (130°C)
에서의 절연유 (23°C)
표준 연료
에서의 ISO 1817 액체 1 (60°C)
에서의 ISO 1817 액체 2 (60°C)
60 °C에서의 ISO 1817 액체 3 (60°C)
에서의 ISO 1817 액체 4 (60°C)
에서의 알코올성 표준 연료 (ISO 1817 액체 4 참조) (23°C)
에서의 디젤 연료 (ISO 1817 액체 F 참조) (23°C)
에서의 디젤 연료 (ISO 1817 액체 F 참조) (90°C)
에서의 디젤 연료 (ISO 1817 액체 F 참조) (>90°C)
염액
에서의 염화나트륨 용액 (질량 10%) (23°C)
에서의 차아염소산나트륨 용액 (질량 10%) (23°C)
에서의 탄산나트륨 용액 (질량 20%) (23°C)
에서의 탄산나트륨 용액 (질량 2%) (23°C)
에서의 염화아연 용액 (질량 50%) (23°C)
기타
에서의 초산 에틸 (23°C)
에서의 과산화수소 (23°C)
에서의 에틸렌 글리콜 수용액 (질량 50%) (108°C)
에서의 물 (23°C)
에서의 탈이온수 (90°C)
에서의 페놀 용액 (질량 5%) (23°C)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.